ENGLISH
|
5
•
The Handle (1) is used to safely lift up and lower the Pressing Plate, and to carry the unit.
•
The Steam Burst Buttons (2) are located on either side of the Handle, and produce a powerful
burst of steam when pressed.
•
The Water Reservoir Cap (3a) covers the Water Reservoir fill hole and must be removed in
order to fill the Water Reservoir with distilled water.
•
The Water Reservoir (3b) is the tank in which distilled water is stored for use by the unit.
There must be water in the Water Reservoir in order for the units steam burst function to
work correctly.
•
The Ironing Board (4) is the padded surface onto which fabric is placed during pressing. The
fabric cover is removable and can be washed.
•
The Pressing Plate (5) is the temperature-controlled teflon surface that heats and
presses fabric.
•
The Pressing Plate Cover (6) is the durable cover that protects the Pressing Plate.
•
The On/Off Switch (7) activates and deactivates the unit.
•
The Locking Knob (8) locks the Pressing Plate and Ironing Board together. This allows for
carrying and storage of the unit.
•
The Power Indicator Light (Red) (9) illuminates when the On/Off Switch is set to the “On”
position, providing you with a clear visual indication that the unit is powered on.
•
The Pressing Indicator Light (Green) (10) illuminates while the unit is heating to the selected
temperature. When deactivated, this indicates that you are ready to press.
•
The Steam Burst Ready Indicator Light (Yellow) (11) illuminates once the unit is ready to
produce bursts of steam, providing you with a clear visual indication that you can begin using
the Steam Burst Buttons.
•
The Temperature Control Buttons (12) are pushed to select a desired temperature. Press the
right arrow button to cycle right through the list of fabric choices above the buttons, and
press the left arrow button to cycle left through the list of fabric choices above the buttons.
•
The Cord Storage Compartment (13) provides a convenient and easily accessible place to
store the power cord.
•
The Measuring Cup (14) is designed to assist you in easily filling the Water Reservoir with
distilled water.
•
The Spray Bottle (15) allows you to moisten fabrics before pressing, which helps to make the
pressing process easier and more effective in certain instances.
•
The Pressing Cushion (16) is a fabric-covered pad used for pressing gathered or contoured
areas such as sleeves, darts, or yokes.
To Next Page
Loading...
