info@splashmonitoring.com www.splashmonitoring.com
Steca Tarom Charge Controller – Ethernet Streambox
Domestic Installation
Hardware summary
Hardware Manufacturer Steca
Hardware Model Tarom 4545
Hardware Size NA
Maximum number of Taroms connected to a single
SPLASH Monitoring STREAMbox
4
List of parts required for connecting the hardware to the SPLASH Monitoring
STREAMbox
To enable you to connect the above hardware to SPLASH Monitoring you will need a SPLASH Monitoring
STREAMbox and connection cables, these parts are listed below.
Hardware Make / Model As above
SPLASH Monitoring STREAMbox SMSB HW - Hardwired inverter connections
Connection cable STREAMbox to inverter Part numbers Steca PA CAB2
Connection cable STREAMbox to clients router or
LAN
Part numbers SM CAT5 1m – 1m CAT5 cable
SM CAT5 2m – 2m CAT5 cable
SM CAT5 5m – 5m CAT5 cable
SM CAT5 10m – 10m CAT5 cable
External Antenna
High Gain External Antenna and mount
AGM024P
WMO
To Next Page
Need help?
General
