Need help?Do you have a question about the Steca PR 2020 and is the answer not in the manual?
General| Type | PWM |
|---|---|
| Rated Current | 20 A |
| Temperature Compensation | Yes |
| Display | LCD |
| Terminals | Screw terminals |
| Max. PV Open Circuit Voltage | 50 V |
| Charge Regulation | PWM |
| Load Current | 20 A |
| Nominal Voltage | 12V / 24V |
| Protection | Reverse polarity, Short circuit |
| Operating Temperature | -20°C to +50°C |
| Max. PV Power at 12V | 240 W |
| Max. PV Power at 24V | 480 W |
| Battery Type | Lead-acid, Gel, AGM |
Introduces the solar charge controller models and their basic identification.
Provides essential safety precautions for handling the controller and batteries, including specific warnings.
Prevents excessive battery discharging or overcharging.
Step-by-step instructions and safety measures for connecting solar modules, battery, and load.
Identifies the controller's buttons and display window for system monitoring and settings.
Describes the various symbols, data, and information presented on the controller's screen.
Explains how the controller calculates and utilizes battery SOC for optimal performance and protection.
Details the controller's constant voltage charging and PWM methods for battery charging.
Describes how the controller prevents excessive battery discharge by switching off the load.
Instructions on navigating menus and changing controller parameters using the buttons.
Explains available modes like SOC control and Voltage control, and their usage scenarios.
Guides setting the battery type (Gel, Liquid, Li) for correct charging voltage.
To Next Page
