Steinbach Poolrunner - Placing the device in the pool; Risk of injury

Inserting the filter unit
1. Place the lter unit
3
in the recess of
the boom part
4
.
2. Press and hold the snap lock on one
side to open it.
3. Press down the lter unit
3
and let go
of the snap lock.
4. Repeat the last two steps on the
opposite side.
The snap locks must x the lter unit in place on both sides in the boom
part.
5. Place the top part
2
on the boom
part
4
.
6. Close all snap locks.
The lter unit is inserted.
Placing the device in the pool
CAUTION!
Risk of injury!
The device can hurt persons in the pool.
- Make sure no one is in the pool while the device is in the water.
7
4
3
8
4
3
9
4
2
39