Steinbach Poolrunner - Connecting the control unit

NOTICE!
A lawnmower can damage a cable placed on the ground.
- Route the cable so that it cannot be damaged by a lawnmower or
similar device.
1. Completely unroll the cable and place it next to the pool without twisng.
2. Hold the device by the handle and
lower it slowly and lted slightly
forward into the water unl all air has
escaped and it sinks to the boom by
itself. The device should run at a right
angle to the pool wall.
The device is in the pool.
Connecting the control unit
WARNING!
Risk of electric shock!
Handling the power plug with wet hands can lead to an electric
shock.
- Never touch the power plug with wet hands.
NOTICE!
High temperatures can damage the control unit.
- Do not cover the control unit.
- Place the control unit in the shade, if possible.
1. Only let as much of the oang cable
1
into the water so that the device can reach
all the spots in the pool.
10
40