MIDEX-8
English – 7
ENGLISH
The MIDEX-8 Features
The MIDEX-8 USB MIDI interface has the following features:
• Full speed connector for USB-compatible PCs or Apple Computers (12Mbit/sec).
• MIDI interface with eight separate inputs and outputs (each connected MIDEX-
8 interface can address up to 128 MIDI channels).
• MIDI activity indicators for all inputs and outputs.
• Under normal circumstances, the MIDEX-8 doesn’t need any external power
supply. As an external device, it is connected to the USB bus of your computer
and therefore receives the necessary power from here. Opening the computer
is not necessary. If needed, the MIDEX-8 lets you also connect a standard power
supply. Find more information on page 35 and page 38.
• A “MIDI Thru” function enables MIDI data transfer without an active sequencer.
You can directly address your instruments without the need to change your MIDI
cable connections.
• Compatible with Mac OS 8.6 (or higher). OMS 2.3.8 or higher required.
• At the time of writing of this manual, Mac OS X compatible drivers were not yet
available. If you are a user of Mac OS X, please visit www.steinberg.net to find the
latest information on available drivers.
• Compatible with Windows 98 SE (Second Edition), Windows ME, Windows 2000
and Windows XP. Plug & Play installation without the need to set IRQs, I/O ad-
dresses or DMA Channels.
• MIDEX-8 supports multi-client operation: several active applications can simulta-
neously access the physical MIDI inputs or outputs.
• 19" rack compatible housing
To Next Page
Loading...
