To Next PageTo Next Page
Need help?Do you have a question about the STEINEL professional Series and is the answer not in the manual?
General| Brand | STEINEL |
|---|---|
| Model | professional Series |
| Category | Security Sensors |
| Language | English |
Guidance on how to follow installation instructions and safety advice.
Explains the meaning of warning symbols and signal words for danger.
Defines the intended use of the sensor and where to find additional details.
Details the components of the device, including mounting hardware and sensor housing.
Instructions to check if the product delivery is complete and undamaged.
Specifies criteria for selecting the optimal mounting position for the sensor.
Considerations for planning usage and checking ambient conditions like humidity.
Steps for physically attaching the sensor to the ceiling holder.
Guidance on connecting the sensor to the mains power and light circuits.
Illustrates how to connect different types of lights to the sensor.
Instructions for installing two-circuit and two-way switches for manual control.
Details on how to activate and deactivate the manual override for lights.
Guides on setting the light's duration and the ambient light level for activation.
Explains how to use shrouds to limit the sensor's detection area.
Steps to verify the sensor's functionality after installation.
Addresses problems like the sensor not switching ON or OFF, or switching unintentionally.
Troubleshooting steps for when the sensor fails to activate.
Troubleshooting steps for when the sensor fails to deactivate.
Troubleshooting steps for unwanted sensor activation due to movement or heat.
Guidelines for environmentally responsible disposal of electrical equipment.
Information on the 5-year warranty and how to make a claim.
Details on dimensions, colours, supply voltage, and switching capacities.
Details sensor type, angle of coverage, aperture, and sneak-by guard.
Specifies detection range, switching ON threshold levels, and stay-ON time.
Information on IP rating and operating temperature range.
Présentation des pièces de l'appareil pour le montage au plafond.
Vérification de la complétude et de l'état de l'appareil à la réception.
