User Assembly Manual
Blueleaf, Charwood House, Oakhurst Business
Park, SOUTHWATER, West Sussex, RH13 9RT, UK
www.steiss.co.uk
BMI procedure
LB mode
Ensure that the scale is at zero.
Have the person sit down on the scale to obtain a weight.
Weight is displayed (without lock annunciator turned on).
Pressing on BMI key will enter BMI mode, BMI and FT indicators are on
and on the display is the height's default value 5ft 7.5in, all digits
flashing.
UP/DOWN key are used to adjust the entire height value. Pressing it
once will adjust by 0.5 in. If you hold the key down it will keep
incrementing\decrementing the values.
Pressing ENTER will accept the value. BMI value is shown on the display,
Pressing CLEAR to return to weighing mode, BMI indicator is off.
KG mode
Ensure that the scale is at zero.
Have the person sit down on the scale to obtain a weight.
Pressing on BMI key will enter BMI mode, BMI and CM indicators are on
and the display shows the height default value 170.0 cm. while all digits
are flashing (the height resolution is 0.5 cm).
UP/DOWN key are used to adjust the entire value. Pressing it once will
adjust by 0.5 cm. If you hold the key down it will keep
incrementing\decrementing the values.
Pressing ENTER will move to BMI value.
BMI value is shown on the display, Pressing CLEAR to return to weighing
mode, BMI indicator is off.
* The last height value entered is saved until the zero flag is displayed or
negative weight is detected, at this point the value returns to the default
value.
* The height value in cm. is independent to the value in ft. and vice versa.
To Next Page
Loading...