6947400000
2
DECLARATION OF CONFORMITY
According to
The Low Voltage Directive 2014/35/EU
The EMC Directive 2014/30/EU
The RoHS Directive 2011/65/EU
The Ecodesign Directive 2009/125/EC
Type of equipment
Wire feeder
Type of designation
601825000L – F20
601823000L – F40
Brand name or trade mark
STEL
Manufacturer or his authorized representatives established within the EEA:
Name, address, phone, website:
STEL s.r.l
Via Del Progresso 59; 36020 Castegnero – Vicenza
Italy
Tel +39-0444-639525 Fax +39-0444-639682 www.stelgroup.it
The following harmonized standard in force within the EEA has been used in the design:
EN 60974-1:2018 Ed. 5, Arc welding equipment – Part 1: Welding power sources
EN 60974-10:2020 Ed.4, Arc welding equipment – Part 10: Electromagnetic compatibility (EMC)
EN 60974-5:2019 Ed.4, Wire Feeders
Additional information: Restrictive use, Class A equipment, intended for use in locations other than
residential.
By signing this document, the undersigned declares as manufacturer, or the manufacturer’s authorized
representative established within EEA, that the equipment in question complies with the safety requirements
stated above.
Date Signature Position
31/03/23 Andrea Barocco General Manager
To Next Page
Loading...