6947400000
26
WATER COOLER ALARM
In case of malfunction of the optional liquid cooling
system the following screen appears:
In this situation the welding and cooling system are
blocked to prevent damage to the torch or the
pump. To resolve this problem, you must reset the
cooling unit, checking the connections or the level
of the liquid.
DUTY CYCLE AND
EXCESSES TEMPERATURE
The duty cycle is the percentage of use of the
welding machine within 10 minutes which the
operator must respect to avoid the machine
blocking output due to temperature being
exceeded.
If the machine goes in overtemperature you will
see the following message on the screen :
After 4 minutes ( necessary for cooling ) the message
vanish.
DISPOSAL OF ELECTRICAL
AND ELECTRONIC
EQUIPMENT
Do not dispose of electrical
equipment together with normal
waste! In observance of European
Directive 2012/19/EU on Waste
Electrical and Electronic Equipment
and its implementation in accordance with national
law, electrical equipment that has reached the end
of its life must be collected separately and returned
to an environmentally compatible recycling facility.
As the owner of the equipment, you should get
information on approved collection systems from
our local representative. By applying this European
Directive you will improve the environment and
human health!
IN CASE OF MALFUNCTIONS, REQUEST
ASSISTANCE FROM QUALIFIED PERSONN
To Next Page
Loading...