Stel F20 - Front Panel Description

6947400000
17
B) WELDING OUTPUT
Power supply symbol (number of phases and
frequency)
Assigned power supply voltage
Values of the assigned welding current
Degree of protection .
Maximum effective power supply current (identifies
the line fuse)
LIFTING
WARNING:
The machine weights without rolls
F20 17,2 Kg / 37,91 lb
F40 17,8 Kg / 39,24 lb
Lifting by hand:
It is possible lifting the machine by hand without
spool.
ATTENTION! No lifting the machine with 15 Kg
spool by himself .
Before lifting the machine take out the 15 Kg spool.
F20
FRONT PANEL DESCRIPTION
FIG.1
1 Encoder Wire Speed / Current regulation;
2 Led MIG 2T;
3 Led MIG 4T;
4 MODE button;
5 Parameters Selection Button ;
6 Led Synergic Mode Active ;
7 Synergic Mode button Activation ;
8 Parameters Selection Button ;
9 Functions Selection Button ;
10 Encoder V / SET regulation;
11 Led inductance;
12 Led Pre gas e Post gas;
13 Display Volts, Incuctance, pre or post gas;
14 Led Volts ;
15 Led Ampere;
16 Display Wire Speed, Thickness , Ampere ;
17 Led Wire Speed ;
18 Led Thickness Material ;
F40
FRONT PANEL DESCRIPTION
FIG.2
1 Encoder Wire Speed / Current regulation;
2 MODE button;
3 Functions Selection Button;
4 Functions Selection Button;
5 Functions Selection Button;
6 Functions Selection Button;
7 Encoder V / SET regulation;
8 Machine live led