www.stenner.com10
Double Head Maximum Pump Tube gallons liters gallons liters ounces milliliters liters liters milliliters
Model Pressure Number per day per day per hour per hour per minute per minute per day per hour per minute
Adjustable
100DMHP5* 100 psi / 6.9 bar #1 0.3 to 6.0 1.1 to 22.7 0.01 to 0.25 0.05 to 0.95 0.03 to 0.53 0.76 to 15.76 0.9 to 18.2 0.04 to 0.76 0.61 to 12.64
100DM1 25 psi / 1.7 bar #1
Fixed Output
100DMPHP5* 100 psi / 6.9 bar 6.0 22.7 0.25 0.95 0.53 15.76 18.2 0.76 12.64
100DMP1 25 psi / 1.7 bar
Adjustable
100DMHP20* 100 psi / 6.9 bar #2 1.0 to 20.0 3.8 to 75.7 0.04 to 0.83 0.16 to 3.15 0.09 to 1.78 2.64 to 52.57 3.0 to 60.6 0.13 to 2.53 2.11 to 42.06
100DM2 25 psi / 1.7 bar #2
Fixed Output
100DMPHP20* 100 psi / 6.9 bar 20.0 75.7 0.83 3.15 1.78 52.57 60.6 2.53 42.06
100DMP2 25 psi / 1.7 bar
Adjustable
100DM3 25 psi / 1.7 bar #3 2.2 to 44.0 8.3 to 166.5 0.09 to 1.83 0.35 to 6.94 0.19 to 3.91 5.76 to 115.63 6.6 to 133.2 0.28 to 5.55 4.58 to 92.50
Fixed Output
100DMP3 25 psi / 1.7 bar 44.0 166.5 1.83 6.94 3.91 115.63 133.2 5.55 92.50
Adjustable
100DM4 25 psi / 1.7 bar #4 3.5 to 70.0 13.2 to 265.0 0.15 to 2.92 0.55 to 11.04 0.31 to 6.22 9.17 to 184.03 10.6 to 212.0 0.44 to 8.83 7.36 to 147.22
Fixed Output
100DMP4 25 psi / 1.7 bar 70.0 265.0 2.92 11.04 6.22 184.03 212.0 8.83 147.22
Adjustable
100DM5 25 psi / 1.7 bar #4 5.0 to 100.0
18.9 to 378.5 0.21 to 4.17 0.79 to 15.77 0.44 to 8.88 13.13 to 262.88 15.1 to 302.8 0.63 to 12.61 10.49 to 210.28
Fixed Output
100DMP5 25 psi / 1.7 bar 100.0 378.5 4.17 15.77 8.88 262.88 302.8 12.61 210.28
Approx. Outputs @ 60 Hz Approx. Outputs @ 50 Hz
#1
#2
#3
#4
#5
Outputs 100 series
NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment.
Many variables can affect the output of the pump. G. H. Stenner & Co., Inc. recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.
*pump supplied with injection check valve for 26-100 psi applications
The dial ring for adjustable pumps is marked L-10; L=5%, 1-10 indicates
10% increments of maximum output. (20:1 Turndown Ratio)
To Next Page
Loading...
