www.stenner.com8
Outputs 45 series
Single Head Maximum Pump Tube gallons liters gallons liters ounces milliliters liters liters milliliters
Model Pressure Number per day per day per hour per hour per minute per minute per day per hour per minute
Adjustable
45MHP2* 100 psi / 6.9 bar #1 0.2 to 3.0 0.8 to 11.4 0.01 to 0.13 0.03 to 0.48 0.02 to 0.27 0.56 to 7.92 0.6 to 9.1 0.03 to 0.38 0.42 to 6.32
45M1 25 psi / 1.7 bar #1
Fixed Output
45MPHP2* 100 psi / 6.9 bar 3.0 11.4 0.13 0.48 0.27 7.92 9.1 0.38 6.32
45MP1 25 psi / 1.7 bar
Adjustable
45MHP10* 100 psi / 6.9 bar #2 0.5 to 10.0 1.9 to 37.9 0.02 to 0.42 0.08 to 1.58 0.04 to 0.89 1.32 to 26.32 1.5 to 30.3 0.06 to 1.26 1.04 to 21.04
45M2 25 psi / 1.7 bar #2
Fixed Output
45MPHP10* 100 psi / 6.9 bar 10.0 37.9 0.42 1.58 0.89 26.32 30.3 1.26 21.04
45MP2 25 psi / 1.7 bar
Adjustable
45MHP22* 100 psi / 6.9 bar #7 1.1 to 22.0 4.2 to 83.3 0.05 to 0.92 0.18 to 3.47 0.10 to 1.96 2.92 to 57.85 3.3 to 66.6 0.14 to 2.78 2.29 to 46.25
45M3 25 psi / 1.7 bar #3
Fixed Output
45MPHP22* 100 psi / 6.9 bar #7 22.0 83.3 0.92 3.47 1.96 57.85 66.6 2.78 46.25
45MP3 25 psi / 1.7 bar #3
Adjustable
45M4 25 psi / 1.7 bar #4 1.7 to 35.0 6.4 to 132.5 0.07 to 1.46 0.27 to 5.52 0.15 to 3.11 4.44 to 92.01 5.1 to 106.0 0.21 to 4.42 3.54 to 73.61
Fixed Output
45MP4 25 psi / 1.7 bar 35.0 132.5 1.46 5.52 3.11 92.01 106.0 4.42 73.61
Adjustable
45M5 25 psi / 1.7 bar #5 2.5 to 50.0 9.5 to 189.3 0.10 to 2.08 0.40 to 7.89 0.22 to 4.44 6.60 to 131.46 7.6 to 151.4 0.32 to 6.31 5.28 to 105.14
Fixed Output
45MP5 25 psi / 1.7 bar 50.0 189.3 2.08 7.89 4.44 131.43 151.4 6.31 105.14
Approx. Outputs @ 60 Hz Approx. Outputs @ 50 Hz
#1
#2
#4
#5
NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment.
Many variables can affect the output of the pump. G. H. Stenner & Co., Inc. recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.
*pump supplied with injection check valve for 26-100 psi applications
The dial ring for adjustable pumps is marked L-10; L=5%, 1-10 indicates
10% increments of maximum output. (20:1 Turndown Ratio)
To Next Page
Loading...
