Stenner 45MHP2 - 85 Series Pump Outputs

US and Canada call 1-800-683-2378, other countries call 1-904-641-1666 9
Single Head Maximum Pump Tube gallons liters gallons liters ounces milliliters liters liters milliliters
Model Pressure Number per day per day per hour per hour per minute per minute per day per hour per minute
Adjustable
85MHP5* 100 psi / 6.9 bar #1 0.3 to 5.0 1.1 to 18.9 0.01 to 0.21 0.05 to 0.79 0.03 to 0.44 0.76 to 13.13 0.9 to 15.1 0.4 to 0.63 0.63 to 10.49
85M1 25 psi / 1.7 bar #1
Fixed Output
85MPHP5* 100 psi / 6.9 bar 5.0 18.9 0.21 0.79 0.44 13.13 15.1 0.63 10.49
85MP1 25 psi / 1.7 bar
Adjustable
85MHP17 100 psi / 6.9 bar #2 0.8 to 17.0 3.0 to 64.4 0.03 to 0.71 0.13 to 2.68 0.07 to 1.51 2.08 to 44.65 2.4 to 51.5 0.10 to 2.15 1.67 to 35.76
85M2 25 psi / 1.7 bar #2
Fixed Output
85MPHP17* 100 psi / 6.9 bar 17.0 64.4 0.71 2.68 1.51 44.65 51.5 2.15 35.76
85MP2 25 psi / 1.7 bar
Adjustable
85MHP40 100 psi / 6.9 bar #7 2.0 to 40.0 7.6 to 151.4 0.08 to 1.67 0.32 to 6.31 0.18 to 3.55 5.27 to 105.14 6.1 to 121.1 0.25 to 5.05 4.24 to 84.10
85M3 25 psi / 1.7 bar #3
Fixed Output
85MPHP40* 100 psi / 6.9 bar #7 40 151.4 1.67 6.31 3.55 105.14 121.1 5.05 84.10
85MP3 25 psi / 1.7 bar #3
Adjustable
85M4 25 psi / 1.7 bar #4 3.0 to 60.0 11.4 to 227.1 0.13 to 2.5 0.48 to 9.46 0.27 to 5.33 7.92 to 157.71 9.1 to 181.7 0.38 to 7.57 6.32 to 126.18
Fixed Output
85MP4 25 psi / 1.7 bar 60.0 227.1 2.50 9.46 5.33 157.71 181.7 7.57 126.18
Adjustable
85M5 25 psi / 1.7 bar #5 4.3 to 85.0 16.3 to 321.8 0.18 to 3.54 0.68 to 13.40 0.38 to 7.55 11.32 to 223.40 13.0 to 257.4 0.54 to 10.73 9.03 to 178.75
Fixed Output
85MP5 25 psi / 1.7 bar 85.0 321.8 3.54 13.40 7.55 223.40 257.4 10.73 178.75
Approx. Outputs @ 60 Hz Approx. Outputs @ 50 Hz
#1
#2
#4
#5
Outputs 85 series
NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment.
Many variables can affect the output of the pump. G. H. Stenner & Co., Inc. recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs.
*pump supplied with injection check valve for 26-100 psi applications
The dial ring for adjustable pumps is marked L-10; L=5%, 1-10 indicates
10% increments of maximum output. (20:1 Turndown Ratio)