STEPCRAFT 840 - 9 Malfunctions; 9.1 Behavior in Case of Malfunctions

20
9 MALFUNCTIONS
9.1 BEHAVIOR IN CASE OF MALFUNCTIONS
CAUTION: If a malfunction occurs on the system which might cause person or material damages please
immediately stop the working process by pressing the emergency-stop switch!
In case of slight malfunctions please stop the machine as usual using the control.
If you are not able to remedy the malfunction yourself please contact us by indicating the malfunction which
occurred. Please find our contact data on item 10.3 of these instructions.
10 ANNEX
10.1 WARRANTY AND SERVICE CONTACT INFORMATION
Country of Purchase
STEPCRAFT
Address
Phone No. / Email
Address
United States of America
STEPCRAFT Inc.
733 E Main St. Unit 3
Torrington, CT, 06790
+1 203 556 1856
info@stepcraft.us
Germany
STEPCRAFT GmbH &
Co. KG
An der Beile 2
58708 Menden
Germany
+49 2373 179 1160
info@stepcraft-
systems.com
Rest of World
Local distributor
STEPCRAFT GmbH &
Co. KG
see https://www.stepcraft-
systems.com/en/retail
An der Beile 2
58708 Menden
Germany
see https://www.stepcraft-
systems.com/en/retail
+49 2373 179 1160
info@stepcraft-
systems.com
10.2 MANUFACTURER
STEPCRAFT GmbH & Co. KG
An der Beile 2
58708 Menden
Germany
Phone: +49 (0) 2373 –179 11 60
E-Mail: info@stepcraft-systems.com
Website: www.stepcraft-systems.com
10.3 TYPE PLATE
The type plate is at the left side of the machine on the inspection flap.
Example: