51
Warranty Claim Authorization Number: _____________________
Call Customer Service at 651-674-4491 to obtain prior approval or warranty will be denied.
Date of Authorization Request _____________________
Equipment Owner Warranty to be Performed by
Customer Name
Company Name
Street Address
Address
City/State/Zip
City/State/Zip
Equipment Model #
Contact Name
Equipment VIN
Contact Phone #
Hour Meter Read
Purchase Date
Date of Malfunction
Dealer Purchased Form
Date of Repair
Warranty Authorization Signature for Authorization
Date of Malfunction
X
Date of Repair
Symptoms / Diagnostics / Action
Symptoms Diagnostics Action
Describe the symptoms in detail, be as spe-
cific as possible. Ex: Burner ignites and runs
for 35 seconds, then goes out.
Describe issues found, be as specific as
possible. Ex: Part failed due to loose
connection, resulting in misalignment
and premature wear.
Describe action taken, be as specific as
possible. Ex: Removed damaged section of
wire harness, soldered new leads in place,
and insulated splices w/ heat shrink tubing.
Parts and Labor
Labor Time to Correct Problem (reimbursed at $55/hour) Parts Used to Correct Problem
Labor Time (in hours) Repair Made Part Number Description Qty
Parts Return
All parts returned must be tagged with the warranty authorization number and a copy of this claim. Retain all parts until credit is received
from the factory. When requested, return the parts, along with this claim, to:
Stepp Manufacturing Co., Inc.
Attn: Warranty Department
12325 River Road
North Branch MN 55056
*Note: If defective parts are not returned within 10 days, or this warranty claim does not accompany the returned parts, the claim will be
denied.
Office Use Only
Date Claim/Parts Received? Is this a warrantable claim? Yes No
Claim Reviewed By: Original Invoice # for Parts
Date of Review:
Warranty Totals
To Next Page
Loading...
