14.- Volume –
15.- Audio
Use this input jacks to connect an audio cable from an external
device
16.- Video
Use this input jacks to connect a video cable from an external
device
17.- S-Video
Use this input to connect a S-Video cable from an external
device
INSTALLATION
1. Turn your PC off including peripheral devices.
2. Check installation diagrams 1, 2 & 3.
3. Open the battery compartment on your remote control and
insert 2 AAA batteries. Close the battery compartment.
4. After making the connections that you wish to use, if you want
to use TV mode, all you need to do is turn your PC monitor on.
Once you select PC mode, you will need to power your PC on.
5. If your installation is correct, you will see the red indicator light
(LED) illuminate and your monitor will display PC or TV. If this
does not occur, check your installation making sure it looks like
in fi gure.
ENGLISH
ENGLISH-6
To Next Page
Loading...
