ZED Camera Setup
Prior to launching the ZED SDK Setup wizard provided in the ZED USB drive, please make sure the following
installation prerequisites are installed.
Important Installation Prerequisites
Before you start developing applications with the ZED, make sure the following assets are installed.
• Latest USB 3.0 drivers.
• Latest NVIDIA Display Driver.
• NVIDIA CUDA 6.5 Toolkit.
• Visual Studio 2012 and 2013 Redistributable Packages
An up-to-date Nvidia GPU is required to use the samples and develop applications for the ZED.
Installing the ZED SDK – Windows
1. Plug your ZED into an USB 3.0 port and make sure the computer has an internet access.
2. Launch the installer ZED_SDK_WinSetup_vX.Y.exe which you will find in the ZED USB Drive and follow the
instructions.
3. Finish the setup procedure, unplug your ZED and restart your computer.
4.
If you have experienced an issue because your ZED wasn’t detected or internet access wasn’t found, please
refer to the Camera Calibration Settings section below.
Internet access is required since the installer will fetch your camera calibration file from our online database.
•
If you don’t have an internet access only during setup, your firewall blocks access or you experience an issue
during setup, please refer to the Camera Calibration Settings section below.
•
If you don’t have an internet access at all on your computer you can still use the ZED SDK but depth
measurement won’t be accurate.
!
Make sure you unplug your ZED
BEFORE
restarting your computer. On some computers, we have noticed that
USB 3.0 devices could prevent from rebooting.
Doc Rev 1.3 - November 7, 2015 4
To Next Page
Loading...