Steris 5085 SRT - User Manual

To Next Page

STERIS 5085 SRT SURGICAL TABLE

SD894 (12/01/10)

Item ________________________

Location(s)___________________

____________________________

The Selections Checked Below Apply To This Equipment

PAD CONFIGURATION

❑ Latex-Free Pads (standard)

❑ FIT Pads (see SD888)

TRANSPORT CONFIGURATION INCLUDES:

❑ Patient Safety Barriers

❑ Patient Straps

ACCESSORY PACKAGES

❑ Standard Accessory Package

❑ X-Ray Top

OPTIONS

❑ Foot Control

APPLICATION

The STERIS 5085 SRT Surgical Table is a mobile,

electrohydraulically operated surgical table designed to

support virtually all general and bariatric surgical

procedures including cardiac and vascular, endoscopic,

gynecology, urology, nephrectomy, neurology,

ophtalmologic and orthopedics with the addition of STERIS

table accessories. The STERIS 5085 SRT Surgical Table also

offers a patient transport feature designed to safely move

patients on hard level surfaces within the surgical suite (from

pre-operative area to operating room and from operating

room to post operative recovery).

DESCRIPTION

The STERIS 5085 SRT Surgical Table is a mobile,

electrohydraulically operated surgical table specifically

designed to provide patient positioning flexibility required

for modern surgical care facilities. The STERIS 5085 SRT

Surgical Table features powered lateral tilt, Trendelenburg/

Reverse Trendelenburg, Zip-Slide™ movable tabletop and

adjustable height functions. This table is designed to

function with:

• 1200 lb (544 kg) load; with the ability to rotate and

raise/lower table but no tabletop articulation or slide.

• 1000 lb (454 kg) load; with the ability to rotate and all

patient posturing but without tabletop slide.

• 600 lb (272 kg) load; with the the ability to rotate, all

posturing, transport feature and tabletop slide.

The STERIS 5085 SRT Surgical Table is constructed of

aluminum alloy, stainless steel and other high quality

materials. Table is equipped with a large sliding tabletop

providing maximum radiological access without patient

reversing.

The STERIS 5085 SRT Surgical Table is powered by either

internal battery or facility electric through use of the

INTELLIPOWER

dual power system.

The table control system accepts positioning commands

from three sources:

1. A primary Hand Control.

2. Physician-controlled foot control (which includes

Trendelenburg Tilts, Lateral Tilts and Height functions).

3. Backup Hand Control functions as override to primary

Hand Control. Located in table base.

Overall size (W x L x H):

20 x 83 x 22.8 to 42.5" (508 x 2098 x 581 to 1080 mm).

Weight:

850 lb (386 kg) approximate.

The standard table configuration includes:

• Power adjustable height, back, leg, Trendelenburg, Zip-Slide

movable tabletop, radiolucent Kidney™ elevator mechanism,

flex/reflex, and lateral tilt functions.

• Manual, removable, adjustable head section.

• Pendant Hand Control.

• Mobile base with hydraulically operated self-compensating

floor locks.

STANDARDS

STERIS 5085 SRT Surgical Tables are in compliance with the

following standards:

• Underwriters Laboratories (UL) Standard 60601-1 2nd

Edition, as certified by ETL.

• Standard CSA-C22.2 No. 601.1-M90, Standard for Electro-

Medical Equipment, as certified by ETL (pending).

• IEC 60601-1: 1993, 2nd Edition, 1995, Electrical Safety, as

certified by ETL.

• IEC 60601-1-2: 2001, Electromagnetic Compatibility, as

certified by ETL.

• EN 55011: Group I, Class A, Emissions Testing, as certified

by ETL.

(Typical only - some details may vary.)

Main Page

Need help?

Do you have a question about the Steris 5085 SRT and is the answer not in the manual?

Summary

Features

Electric Controlled System

Details powered tabletop positioning, primary control system, and user input.

Electrical System

Explains power source, isolation transformer, battery system, and charging.

Pendant Primary Hand Control

Describes ergonomic design, controls, and connection of the primary hand control.

Control Systems

Foot Control System

Details actuation, hydraulic power, and location of the foot pedal.

Backup (Override) Control System

Explains override capabilities, components, and functions of the backup control.

Patient Transport

Patient Transport Functions

Lists table speed, weight capacity, and stopping distance for transport.

Drive Head Section

Describes the removable drive section, its controls, and head section articulation.

Utility Requirements

Power Source & Input

Specifies battery/electric power source and line power input requirements.

Environmental Use Conditions

Defines acceptable temperature and humidity ranges for operation.

Summary

Features

Electric Controlled System

Details powered tabletop positioning, primary control system, and user input.

Electrical System

Explains power source, isolation transformer, battery system, and charging.

Pendant Primary Hand Control

Describes ergonomic design, controls, and connection of the primary hand control.

Control Systems

Foot Control System

Details actuation, hydraulic power, and location of the foot pedal.

Backup (Override) Control System

Explains override capabilities, components, and functions of the backup control.

Patient Transport

Patient Transport Functions

Lists table speed, weight capacity, and stopping distance for transport.

Drive Head Section

Describes the removable drive section, its controls, and head section articulation.

Utility Requirements

Power Source & Input

Specifies battery/electric power source and line power input requirements.

Environmental Use Conditions

Defines acceptable temperature and humidity ranges for operation.

The STERIS 5085 SRT Surgical Table is a mobile, electrohydraulically operated surgical table designed to support virtually all general and bariatric surgical procedures, including cardiac and vascular, endoscopic, gynecology, urology, nephrectomy, neurology, ophthalmologic, and orthopedics. It also features a patient transport function for safely moving patients on hard, level surfaces within the surgical suite (from pre-operative area to operating room and from operating room to post-operative recovery).

Function Description:

The STERIS 5085 SRT Surgical Table provides patient positioning flexibility required for modern surgical care facilities. It features powered lateral tilt, Trendelenburg/Reverse Trendelenburg, Zip-Slide™ movable tabletop, and adjustable height functions. The table is designed to function with various load capacities:

1200 lb (544 kg) load: Allows rotation and raising/lowering of the table, but no tabletop articulation or slide.
1000 lb (454 kg) load: Allows rotation and all patient posturing, but without tabletop slide.
600 lb (272 kg) load: Allows rotation, all posturing, transport feature, and tabletop slide.

The table is constructed of aluminum alloy, stainless steel, and other high-quality materials. It is equipped with a large sliding tabletop, providing maximum radiological access without patient reversing. The table is powered by either an internal battery or facility electricity through the INTELLIPOWER® dual power system.

Important Technical Specifications:

Overall Size (W x L x H): 20 x 83 x 22.8 to 42.5 inches (508 x 2098 x 581 to 1080 mm).
Weight: Approximately 850 lb (386 kg).
Motorized Tabletop: Constructed of four sections (not including the motorized fully radiolucent Kidney elevator mechanism), 83 inches (2098 mm) long.
Unobstructed Imaging Length: 63-1/2 inches (1613 mm) with 100% C-Arm access without table movement.
Tabletop Sections: Include standard stainless-steel side rails on both sides, hook-and-loop fastener strips for instant application and removal of 2-inch (51 mm) thick, latex-free TLT mattress pads. Radiolucent sections enable viewing of the entire anatomy.
Kidney Elevator Mechanism: 4 inches (110 mm).
Head Section (Manual): UP: 60°±1°, DOWN: 90°±1°, 10° increments.
Flex/Reflex: 140°/100°±1°.
Slide Motion: HEAD: 9 inches (227 mm), FOOT: 9 inches (227 mm) from center.
Height Range: 22.8 to 42.5 inches (581 to 1080 mm).
Trendelenburg Range: 30°±1°.
Reverse Trendelenburg Range: 30°±1°.
Tilt Range: 20°±1°.
Back Section Motion: UP: 80°±1°, DOWN: 40°±1°.
Leg Section Motion: UP: 0°, DOWN: 105°±1°.
Table Speed (Patient Transport): Forward ≤1.9 mph (≤3 km/h); Reverse ≤1.2 mph (≤2 km/h).
Table Weight Capacity (Patient Transport): 600 lb (272 kg).
Stopping Distance (Patient Transport): ≤2 feet (0.6 m) with motor braking in forward motion (at 2 mph [3 km/h] with 600 lb patient).
Power Source: Battery/Electric-Powered Table.
Line Power Input: 100/120/220/230-240 V ac (Jumper Selectable), 1Ø, 50/60 Hz, 4.0 Amp.
Environmental Use Conditions: Temperature: 50 - 104°F (10 - 40°C), Relative Humidity (RH): 20 - 80%.
Compliance: UL Standard 60601-1 2nd Edition, CSA-C22.2 No. 601.1-M90, IEC 60601-1: 1993, 2nd Edition, 1995, IEC 60601-1-2: 2001, EN 55011: Group I, Class A.
Operation: Suitable for intermittent operation, three minutes per hour.

Usage Features:

The table control system accepts positioning commands from three sources:

Primary Hand Control: Ergonomically designed, with a keypad illuminated for easy table articulation identification in dark rooms. It provides user inputs via touch pad switches and includes status LEDs and tabletop position indicators. Equipped with a 7-1/2 foot (2.3 m) extended detachable long cord.
Physician-controlled Foot Control (Optional): Includes Trendelenburg Tilts, Lateral Tilts, and Height functions. Can be actuated at any time and allows table operation in the event of primary control or power malfunction. A pedal provides hydraulic power if necessary.
Backup Hand Control: Located in the table base, it functions as an override to the primary Hand Control in case of primary control or power malfunction. Includes SLIDE HEAD/FOOT, HEIGHT UP/DOWN, TREND./REV. TREND., TILT RIGHT/LEFT, BACK UP/DOWN, and FLOOR LOCK/UNLOCK functions. A green LED indicates system activity.

Patient Transport Feature:

Actuated when floor locks are unlocked and the patient is in the correct transport orientation.
Patient security is ensured through removable/lockable patient safety barriers and patient straps.
Powered by a battery-powered drive wheel, with user control over table steering, deceleration, and stopping via motor braking.
Forward and reverse directional controls are integrated into the special Drive Head Section, allowing for proportional speed control.
Enables pivoting a patient around the center of the drive wheel for table repositioning.
The Drive Head Section is a cordless, removable, manually operated table section containing user control features for patient transport. It incorporates two buttons: drive engage/disengage and direction (forward and reverse). It also has a center latch for articulating the head section from +60° to 90° in 10° increments and a locking feature to prevent inadvertent removal.

Pre-operative Actions:

Power Activation: Use battery power or plug the table power cord into both table base and facility power receptacle. Toggle Main Power Switch to ON for facility AC power.
Turn Table On: Press any button on the Hand Control.
Lock Table: Press the FLOOR LOCK button on the Hand Control and then the LOCK button to order the floor locks into the "locked" position.

Auto Limit Sensor™ Control Device: Provides instant user feedback on conflicting tabletop articulations when the table is positioned in standard configuration and how to resolve the conflict.

Maintenance Features:

Customers are encouraged to contact STERIS for their comprehensive preventive maintenance program. This program provides preventive maintenance, adjustments, and replacement of worn parts on a scheduled basis to ensure optimal equipment performance and avoid untimely or costly interruptions. STERIS maintains a global staff of well-equipped, factory-trained technicians to provide these services.