1 — A Word From STERIS
2
11003604_F
AMSCO
®
Case Carts
Operator Manual
A Word From STERIS
1.1 Introduction
This manual contains important information on the proper use and routine maintenance of this equipment. All
personnel involved in the use and maintenance of this equipment must carefully review and comply with the Safety
Precautions and instructions contained in this manual. These instructions are important to protect the health and
safety of personnel operating this case carts and should be retained in a conveniently accessible area for quick
reference. This equipment is specifically designed only for the uses outlined in this manual.
Complete instructions for uncrating and connecting utilities, as well as the equipment drawing, have been provided. If
they are missing, contact STERIS for replacement copies, providing the serial number and model of the case cart.
1.2 Intended Use
The AMSCO Case Cart is intended to transport surgical instrument sets, endoscopes and other accessories in a hospital
setting.
1.3 Service Information
A thorough preventive maintenance program is essential to safe and proper operation. You are encouraged to contact
STERIS IMS concerning our Preventive Maintenance Agreement. Under terms of this agreement, preventive
maintenance, adjustments and replacement of worn parts are done on a scheduled basis to assure equipment
performance at peak capability and to help avoid untimely or costly interruptions. Contact your STERIS IMS
representative for details.
1.4 Associated Publications
Associated Publications
Document
Title
11003605
AMSCO Case Carts Uncrate/Installation
11003604
AMSCO Case Carts Operator Manual
11029738
EQUIPMENT DRAWING, CASE CART 28.6 X 36.3 X 39.6
11029741
EQUIPMENT DRAWING, CASE CART 28.6 X 36.3 X 54.6
11029739
EQUIPMENT DRAWING, CASE CART 28.6 X 47.3 X 39.6
11029742
EQUIPMENT DRAWING, CASE CART 28.6 X 47.3 X 54.6
11029740
EQUIPMENT DRAWING, CASE CART 28.6 X 54.3 X 39.6
11029743
EQUIPMENT DRAWING, CASE CART 28.6 X 54.3 X 54.6
1.5 Environmental Conditions
• The Case Cart Wash Chamber must be non-pressurized.
To Next Page
Loading...
