Why is the amber warning LED flashing on my Steris Reliance 6000 Laboratory Equipment?
The flashing amber warning LED on Steris Laboratory Equipment indicates that the door sensor (D1 or D2) has detected an open door for longer than 45 seconds.
What does a solid amber warning LED mean on Steris Laboratory Equipment?
The solid amber warning LED on Steris Laboratory Equipment indicates that both HEPA pre-filters need to be replaced. Contact Steris for assistance.
Covers risks from unqualified personnel, electrical hazards, and tripping.
Cautions against using improper cleaners and tools on the cabinet.
Explains solid and flashing amber/red LEDs and their causes.
Addresses alarms for HEPA/Pre-filters expiring or expired.
General| Application | Laboratory sterilization |
|---|---|
| Cycle Time | Varies depending on cycle parameters |
| Water Consumption | Varies depending on cycle parameters |
| Material | Stainless steel |
| Sterilization Type | Steam |
| Pressure Range | Varies depending on cycle parameters |
| Control System | Microprocessor-based |
| Construction Material | Stainless steel |
To Next Page