8. RETURN MATERIAL AUTHORIZATION
If materials are to be returned to Sterlitech for repair, evaluation, or warranty consideration,
a Return Material Authorization (RMA) number and form must be obtained from Sterlitech
prior to the return. Contact Sterlitech’s Customer Service Department for these forms.
The form must be completed and returned with the material. Be sure to include a
complete, detailed written reason for the return. Also, include serial numbers, installation
and removal dates, and any other pertinent information that is available. HP4750 Cells
have a serial number imprinted on the cell bottom.
Indicate the proposed disposition of the material, and reference the RMA number on all
packages or cartons. All material must be shipped to Sterlitech with freight prepared by
the customer.
9. WARRANTY
The following is made in lieu of all other warranties expressed or implied. Sterlitech
Corporation guarantees equipment to be free from defects in material and workmanship
when operated in accordance with written instructions for a period of one year from
receipt. Parts not manufactured by Sterlitech are covered by their manufacturer’s
warranties, which are normally for one year.
Manufacturers and Seller’s only obligation shall be to issue credit against the purchase
or replacement of equipment proved to be defective in material or workmanship. Neither
manufacturer nor seller shall be liable for any injury, loss or damage, direct or indirect,
special or consequential, arising out of the use of, misuse, or the inability to use such
product.
The information contained herein is based on technical data and tests, which we believe
to be reliable, and is intended for use by persons having technical skill at their discretion
and risk. Since conditions of use are outside Sterlitech’s control, we can assume no
liability whatsoever for results obtained or damages incurred through the application of the
data presented.
This information is not intended as a license to operate under, or a recommendation to
infringe upon, any patent of Sterlitech or others covering any material or use.
The foregoing may not be altered except by a written agreement signed by ocers of the
manufacturer.
10. TECHNICAL ASSISTANCE
Please contact us if you have any questions or technical inquiries about our products by
calling Sterlitech Corporation at 1-877-544-4420 or by visiting www.sterlitech.com.
Sterlitech Corporation | HP750 Cell Manual
11
To Next Page
Loading...