What to do if my stertil-KONI ST 1085-FWA has no battery power?
If your Stertil-KONI Lifting Systems has no battery power, try these solutions: * Charge the batteries using the provided mains cable, avoiding external booster chargers. It is also recommended to have the batteries checked by a specialist. * Check the main fuse located above the batteries. * Ensure the main switch is set to the ON position.
What to do if my stertil-KONI ST 1085-FWA column lift cannot be raised?
If your Stertil-KONI column lift cannot be raised, consider the following: * Check the main fuse above the batteries and have the batteries inspected by a battery specialist if there's no battery power. * If the oil level is too low but the motor is running, top up the oil. * If air is present in the hydraulic pump (possible after the tank has been empty), select [SINGLE] operation and press the [UP] button until the column lift rises, but no more than 1 minute.
General| Brand | stertil-KONI |
|---|---|
| Model | ST 1085-FWA |
| Category | Lifting Systems |
| Language | English |
To Next Page
