277
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
• Stop the machine, and remove plug from the socket, remove the disabling device. Make
sure that all moving parts have come to a complete stop.
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine,
- after striking a foreign object. Inspect the machine for damage and make repairs
before restarting and operating the machine;
• if the machine starts to vibrate abnormally (check immediately)
- inspect for damage,
- replace or repair any damaged parts,
- check for and tighten any loose parts.
4 Maintenance and storage
• Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
• Check the grass collector frequently for wear or deterioration.
• On machines with multi blade, take care as rotating one blade can cause other blades to
rotate
• Be careful during adjustment of the machine to prevent entrapment of the ngers
between moving blades and xed parts of the machine.
• Always allow the machine to cool down before storing
• When servicing the blades be aware that, even though the power source is switched o,
the blades can still be moved.
• Replace worn or damaged parts for safety. Use only genuine replacement parts and
accessories.
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not op erate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
To Next Page
Loading...
