STERWINS 43PBC1-40BH.1 - Unboxing and Installation

13
RU
KZ
EN
4.1 UNBOXING
1 2
9
8
7
6
5
3
4
10
11
11a
12b
22
23
24
18
17
16
15
14
13
19
21
12
12a
20
18b
18a18d
18c
1. Engine
2. Spark plug connector
3. Air vents
4. Muer
5. Fuel tank
6. Recoil starter handle
7. Fuel tank cap
8. Primer
9. Air lter case
10. Chock lever
11. Suspension sleeve
11a. Loop
12. Harness
12a. Hip protection pad
12b. Securing clip
13. Lower shaft
14. Upper shaft
15. Control cable
16. Bracket
17. Cable tie
18. Control handle
18a. Ignition switch
18b. Throttle interlock
18c. Throttle control
18d. Starter aid button
19. Bracket
20. Gear head
21. Cutter blade
22. Safety guard
23. Knife
24. Trimming head
• Wear gloves when unboxing.
• Do not use cutter, knife, saw or any other similar tool for unboxing.
• Carry the tool only by the handle.
• Store away from furnaces, stoves, water heaters or other appliances that have pilot
lights or other ignition sources because they can ignite fuel vapors.
• Risk of re in case of dry vegetation in the neighborhood.
• The engine shall always be OFF when the machine is left on the ground.
• Keep the box for further reuse (transport and storage).