19
RU
KZ
EN
8. MAINTENANCE
8.1 CLEANING
DANGER! Risk of injury due to electric shock.
Remove the sparkplug of the tool before adjusting,
inspecting, cleaning or storing the product.
WARNING ! Do not handle cutting parts without gloves as
they are sharp and can become hot after use, potentially
causing personal injury.
Cleaning the product : Illustration
5.7
to
5.10
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the equipment
with a cloth. It is highly suggested that you clean the device after every use. Do not use cleaning agents,
as these can attack the plastic and weaken the structural integrity of the product.
8.2 MAINTENANCE SCHEDULE
Part Action Before/After each usage Every 10H
AIR FILTER
CHECK
CLEAN
CHANGE WHEN IT'S NECESSARY / REFER TO TROUBLE SHOOTING
SPARK PLUG
CHECK
CLEAN
CHANGE WHEN IT'S NECESSARY / REFER TO TROUBLE SHOOTING
GASOLINE FILTER
CHECK
CLEAN
CHANGE WHEN IT'S NECESSARY / REFER TO TROUBLE SHOOTING
BLADE
CHECK
CLEAN
CHANGE WHEN IT'S NECESSARY / REFER TO TROUBLE SHOOTING
SHARP
SPOOL
CHECK
CLEAN
REWIND WHEN IT'S NECESSARY
CHANGE WHEN IT'S NECESSARY / REFER TO TROUBLE SHOOTING
GREASE
To Next Page
Loading...
