STERWINS 43PBC1-40BH.1 - Troubleshooting

24
RU
KZ
EN
POS DESCRIPTION NB
91 Belt seat xing clip 1
92 Hex. Screw M5X16 1
93 Cutter blade 1
94 Trimming head 1
95 Cutter blade sleeve 1
96 Multi tool 1
97 Internal hexagonal
wrench M5
1
98 Internal hexagonal
wrench M4
1
99 Mixing bottle 1
8.5 TROUBLESHOOTING
DANGER ! Risk of injury due to electric shock.
Warning ! Before any trouble shooting, switch o the product.
Problems Probable causes Solutions
Qualication
required
Loss of the blade
The blade has been not
enough screwed
Check the blade xation -
The motor has a motor
conception issue
Check if the product is linked
to a product recall
After sales
service
No engine stop
The OFF switch is defective
Test it and change it by a new
one
After sales
service
The brake system is
defective
Test it and change it by a new
one
After sales
service
The trigger system is
defective
Test it and change it by a new
one
After sales
service
No engine start
Gasoline tank is empty
Fill the tank with a good
mixture of gasoline and oil
-
Fill the tank with a new
gasoline
-
The gasoline strainer is not
well placed (on the bottom)
Check its position or replace it -
The switch is on OFF
position
Put the switch on ON position -