186
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
5. WINTERING & STORAGE
5.1 GREASE THE CUTTING BLADE
Grease the blade : illustration
6.1
Apply a small amount of suitable lubricant on the blade (after cleaning) to keep good cutting
performances and better storing conditions.
5.2 STORE THE MACHINE
Store the product : illustration
6.1
to
6.3
Pull the power plug from the socket. Be sure to secure the unit while transporting. Examine the
unit thoroughly for worn, loose or damaged parts. Clean the product before storing.
Only store the machine in a clean, dry, ventilated place with a temperature range of 4°C to
24°C. Cover it in order to provide added protection. Do not expose the product to sunlight. Make
sure the product is always protected from cold and humidity. We recommend using the original
package for storage or covering the product with a suitable cloth or enclosure to protect it
against dust
6. MAINTENANCE
6.1 CLEANING
WARNING ! DO NOT HANDLE CUTTING PARTS WITHOUT GLOVES
AS THEY ARE SHARP AND CAN BECOME HOT AFTER USE,
POTENTIALLY CAUSING PERSONAL INJURY.
Cleaning the product : illustration
5.1
to
5.3
Pull the power plug from the socket. Let the machine cool for 2 hours outside before cleaning it.
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the
product with a cloth. It is highly suggested that you clean the device after every use. Do not
use cleaning agents, as these can attack the plastic and weaken the structural integrity of the
product.
6.2 MAINTENANCE SCHEDULE
Part Action Before/After each usage Every 10H
Blade
CHECK
ವ
CLEAN
ವ
GREASE
ವ
CHANGE
WHEN IT'S NECESSARY / REFER TO TROUBLE
SHOOTING
6.3 REPLACEMENT
Replace the blade : illustration
5.2
When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage. If you shall replace the cutting blade, make sure that the
To Next Page
Loading...
