1. Intended use
2. Safety instructions
3. Know your product
4. Technical specications
5. Assembly
6. Functions
7. Operation
8. Troubleshooting
9. Disposal and recycling
10. Warranty
11. Exploded view with parts list
12. EC declaration of conformity
Keep bystanders away
Read operator's manual
Danger - Rotating blades. Keep hands
and feet out of openings while machine is
running.
Switch o and remove plug from mains
before adjusting, cleaning or if the cord is
entangled or damaged.
Wait until all machine components have
completely stopped before touching them.
Wear eye and ear hearing protection.
Wear protective gloves.
Wear sturdy, non-slip footwear.
Wear tight-tted protective clothes.
Do not use as a step.
Disconnect from mains power immediately if
the power cord becomes damaged.
Protection against splashed water
from all directions.
Guaranteed noise power level.
Conforms to relevant EC safety
standards.
Do not dispose of electrical
equipment in domestic waste.
Machines marked(P40) are operated
intermittently until stabilization or
for 30 cycles, whichever is achieved
rst, each cycle comprising a
period of operation of 40s at rated
power input and a period of 60s
with the machine at no load. The
temperature is measured at the end
of a load period .
IPX4
P40
Class II - Double insulation.
S YMBOLS
CONTENTS
Ukrainian Conformity Mark Green point : Packaging
recycling.
242
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
To Next Page
Loading...
