CAUTION: Always be sure that the product is switched o and unplugged before carrying out
any work on the tool.
1. Place the upper housing upside down on a at surface. Then align the base frame on to it.
Make sure the base frame is the right way around.
2. Attach the feet using the 2 screws. Make sure they are fastened tightly.
3. Attach the wheels:
gPut the wheel bolt through the spindle sleeve.
gPlace the wheel bolt and spindle sleeve through the wheel.
gPlace a washer on the wheel bolt before inserting the bolt through the base leg. Secure it
with a nut. Make sure the nut is tight, but the wheel still rotates.
gRepeat on the other side.
4. Fasten the base frame to the upper housing with the 4 screws. Make sure all parts are
perfectly stable and tightened suciently.
5. Insert the retaining basket.
5.ASSEMBLY
255
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
To Next Page
Loading...
