STERWINS ESH2-45.41 - Product Functions; Power Switch Operation; Resetting the Motor; Forward and Reverse Switch

6.FUNCTIONS
WARNING: Before plugging the product in, always make sure that the product is switched o.
Plugging the product in with the switch on, may cause an unexpected start resulting in
serious personal injury.
POWER SWITCH
CAUTION: Do not use the product if the switch does not turn it on and o. Defective switches
must be replaced by STERWINS’ authorised service dealers.
gTo turn on the product, push the (I) Green on button.
gTo turn o the product, push the (O) Red o button.
PRESS TO RESET
gThe motor is equipped with overload protection. When overloaded, the product switches
o automatically.
gTo turn on the product after 3 or 5 minutes, press the reset button manually.
gPush the (I) Green on button, restart the product.
FORWARD / REVERSE SWITCH
CAUTION: Switch o the shredder before changing the forward / reverse switch.
POSITION
gThe blades rotate in the forward direction.
POSITION
gThe blades rotate in the reverse direction to release jammed material.
When you change the direction into
(reverse), hold the green power switch to rotate
the blades. The shredder automatically stops when you release the power switch.
NOTE: Several repetitions of reverse and forward operations may be required to shred a large
object.
CAUTION: Always use plunge rod supplied to remove jammed objects to prevent accidents.
Always wait until the shredder stops completely before restarting.
RETAINING BASKET
CAUTION: Switch o and unplug the product before attaching or removing the retaining
basket.
gCheck the functionality of the interlock feature every two hours for safe operation.
256
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN