STERWINS ESH2-45.41 - Page 116

Description Model no. or Specication
Blade 8231-546302
WARNING! For your safety, it is required that the plug attached
to this product is always connected to an extension cord! The
extension cord must be suitable for outdoor use with sockets protected
against water splashing! Ensure the extension cord is of the proper
size and type for your product (≥ 1.5mm
2
),which shall not less rubber
insulated, ordinary polychloroprene sheathed exible cord(code
designation (H05VV-F) and length should more than 10m.
The maximum permissible system impedance is Zmax<0.136Ω at
the interface point of the user’s supply. The user should determine in
consultation with the supply authority, if necessary, that the equipment
is connected only to a supply of that impedance or less.
2. SAFETY INSTRUCTIONS
product maintained or repaired by a competent person at an authorized
service center.
The following part of this product may be replaced by the consumer.
Spare parts are available at an authorised dealer or through our customer
service.
keep hands and feet out of openings while machine is running.When
hands touch the rotating blades ,the hands might be cut, it will cause
serious persinal injury hazards.
252
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN