stewmac.com
3
Parts list
Mahogany body
Maple neck
Neck plate with plastic backer
Neck attachment screws (4)
Tuners with bushings, washers, and screws (set of 6)
Bridge with mounting screws
Pickguard with mounting screws
Prewired control plate with mounting screws
Neck pickup with mounting screws and springs
Bridge pickup with mounting screws and springs
Strap buttons with screws and protective washers (2)
String trees with screws (2)
1.5mm hex wrench for adjusting bridge saddles
4mm hex wrench for adjusting truss rod
Output cord
Output jack with mounting screws
Strings (2 sets)
Solder
To Next Page
Loading...
