EasyManua.ls Logo

StewMac UKULELE KIT User Manual

StewMac UKULELE KIT
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Sheet #i-5371 Updated 11/18
Assembly
Instructions
StewMac
UKULELE
KIT
PREMIUM SOLID-WOOD
Question and Answer IconNeed help?

Do you have a question about the StewMac UKULELE KIT and is the answer not in the manual?

StewMac UKULELE KIT Specifications

General IconGeneral
TypeUkulele Kit
BrandStewMac
Instrument TypeUkulele
Skill LevelBeginner to Intermediate
SizeSoprano
Wood TypeMahogany
FinishUnfinished
Strings IncludedYes
Tuners IncludedYes
Fretboard MaterialRosewood
Number of Frets12
Scale Length13.5 inches
Kit IncludesAll parts and instructions to build a ukulele
Body ShapeTraditional Ukulele

Summary

Tools and Supplies

Installing the Rosette

Rosette Installation Steps

Instructions for fitting and gluing the decorative rosette into the top.

Brace the Top and Back

Gluing Back Braces

Securing the back braces to the ukulele back plate with glue and clamps.

Bracing the Top

Locating and applying braces to the ukulele top for structural support.

Gluing Top Braces

Applying glue and clamping top braces to ensure proper adhesion.

Assemble the Body

Glue Sides and Blocks

Attaching neck and tail blocks to the ukulele sides within the mold.

Install the Linings

Shaping the Braces

Fit Back to Sides

Trimming back braces and notching linings for precise back plate fitting.

Glue the Back on the Rim

Clamping the Back

Securing the back plate to the body using rubber bands and a mold.

Sand Top and Back Flush

Glue the Top on Rim

Attaching the top plate to the ukulele body using clamps.

Prepare the Neck

Install Frets

Fitting and securing fret wire into the fingerboard slots.

Locate the Bridge

Fitting the Neck Joint

Attach the Neck

Neck Gluing and Clamping

Securing the neck to the body using glue, bands, and clamps.

Apply the Finish

Glue the Bridge

Bridge Installation

Attaching the bridge to the ukulele body with glue and clamps.

Install the Tuners

Adjust the Nut Height

Install the Strings

Stringing the ukulele and tuning it to pitch.

Related product manuals