< 42 >
6 . Secure the DISPLAY TOP ASSEMBLY - S25T
① Connect the cables between the DISPLAY CONSOLE ASSEMBLY and DISPLAY TOP ASSEMBLY as sh
own .(1)
1) Data cable - S25T
- Connect the Data cable with the INTERFACE BOARD of the DISPLAY CONSOLE ASSEMBLY .
2) Key cable
–
S25T, S25TX
- Connect the Key cable with the INTERFACE BOARD of the DISPLAY CONSOLE ASSEMBLY .
② Stand the DISPLAY TOP ASSEMBLY.
Fasten 4 bolts(M8 × 50mm) with 6mm L-wrench.(2)
To Next Page
Loading...
