STIEBEL ELTRON Accelera 300 - Page 32

32 | ACCELERA 300 WWW.STIEBEL-ELTRON-USA.COM
INSTALLATION
SPECIFICATION
Model Heat pump water heater
Rated power consumption HP (in accordance with
DIN 8947, at 15 °C air temperature, 70% relative
humidity and 45 °C water temperature) kW 0.5
Power consumption, booster heater kW 1.690
Heating output HP (at 15 °C air temperature, 70%
relative humidity, water heat-up from 15 °C to 60 °C, in
accordance with EN 255 T3, 240V/60Hz) kW approx. 1.7
Coefficient of Performance (COP) (t) (at 59 °F / 15 °C air
temperature, 70% relative humidity, water heat-up from
59 °F / 15 °C to 140 °F / 60 °C, in accordance with
EN 255 T3, 240V/60Hz) 3.18