STIEBEL ELTRON Accelera 300 - OPERATION; 1. Overview; 2. General information; 2.1 Key to symbols

OPERATION
OVERVIEW
6 | ACCELERA 300 WWW.STIEBEL-ELTRON-USA.COM
1. Overview
Front of the water heater
7
6
2
5
4
3
1
26_03_01_0880
4
4
1 Water heater cover
2 Opening for PT valve
3 Condensate drain
4 Leveling feet
5 Cold water inlet
6 Hot water outlet
7 Air entry
The water heater extracts heat from the ambient air and
utilizes this energy to heat water.
An 80 gallon water tank is part of the water heater. Foam
insulation is applied to the outside of the water tank to
prevent heat losses. The water heater casing is made
from powder-coated sheet steel.
The internally enameled water tank is supported by
three height-adjustable anti-vibration leveling feet.
OPERATION
Back of the water heater
8
9
26_03_01_0880
8 Air discharge
9 Entry for the power cable
2. General information
The chapter Operation is intended for users and licensed
installers.
The chapter Installation is intended for licensed
installers only.
2.1 Key to symbols
2.1.1 Layout of safety information
DANGER Electric shock
Before any work on the water
heater, disconnect all poles from
the power supply.
1
3
4
2
1 Symbol (see chapter "Symbols")
2 Keyword (see chapter "Keywords")
3 Designations (see chapter "Symbols")
4 Information text