STIEBEL ELTRON DHC 4 - Data Table; Guarantee; Environment and Recycling

WWW.stiebel-eltron.com DHC | 27
ENGLISH
INSTALLATION | GUARANTEE | ENVIRONMENT AND RECYCLING
Specication
15.6 Data table
DHC 3 DHC 4 DHC 6 DHC 8 DHC 6 U
073478 073715 073480 073481 073479
Electrical details
Rated voltage V 220 230 240 220 230 240 220 230 240 220 230 240 220 230 240
Rated output kW 2,7 3,0 3,3 4,0 4,4 4,8 6,0 6,6 7,2 8,0 8,8 9,6 6,0 6,6 7,2
Rated current A 12,2 13,0 13,4 18,1 19,1 20,8 27,2 28,6 30,0 36,3 38,2 40,0 27,2 28,6 30,0
Fuse A 16 16 16 20 20 20 30 30 30 40 40 40 30 30 30
Cable cross-section mm
2
2,5 4 6 4
Phases 1/N/PE 1/N/PE 1/N/PE 1/N/PE 1/N/PE
Frequency Hz 50/60 50/60 50/60 50/60 50/60
Max. mains impedance Zmax to DIN
EN 61000-3-11
Ω 0,47 0,47 0,32 0,24 0,32
Connections
Water connection G 1/2 A G 1/2 A G 1/2 A G 1/2 A G 3/8 A
Total alkaline earths mol/m³ 2,5 2,5 2,5 2,5 2,6
Total hardness (H
2
O) Degree d 14 14 14 14 14
Hardness range 2 (average hardness) 2 (average hardness) 2 (average hardness) 2 (average hardness) 2 (average hardness)
Application limits
Max. permissible pressure MPa 1 1 1 1 1
Test pressure MPa 1,1 1,1 1,1 1,1
Values
Max. permissible inlet temperature °C 30 20 30 25 30
ON l/min > 1,6 > 1,6 > 2,6 > 3,0 > 2,6
Pressure drop at flow rate MPa 0,025 0,025 0,025 0,03 0,025
Flow rate for pressure drop l/min 1,6 1,6 2,6 3,0 2,6
DHW delivery l/min 1,7 2,5 3,7 5,0 3,7
Δϑ at DHW delivery K 25 25 25 25 25
Hydraulic data
Rated capacity l 0,5 0,5 0,5 0,5 0,5
Versions
Sealed unvented type X X X X X
Oversink installation X X X X
Undersink installation X
IP-Rating IP24 IP24 IP24 IP24 IP24
Protection class 1 1 1 1 1
Material of the pressure vessel Copper Copper Copper Copper Copper
Heating system heat generator Tubular heater Tubular heater Tubular heater Tubular heater Tubular heater
Cap and back panel Plastic Plastic Plastic Plastic Plastic
Colour white white white white white
Dimensions
Height mm 360 360 360 360 360
Width mm 200 200 200 200 200
Depth mm 104 104 104 104 104
Weights
Weight kg 2 2,1 2,4 2,4 2,4
GUARANTEE
ENVIRONMENT AND RECYCLING
INSTALLATION TEMPLATE (IN THE CENTRE SECTION OF THESE INSTRUCTIONS)
Guarantee
The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant
-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not aect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
Guarantee
The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not aect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment.
After use,
dispose of the various materials in accordance with national
regulations.