OPERATION
1. General information �����������������������������������������2
1.1 Safety information ����������������������������������������������� 2
1.2 Other symbols in this document ������������������������������ 3
2. Safety ���������������������������������������������������������� 3
2.1 Intended use ������������������������������������������������������ 3
2.2 General Information��������������������������������������������� 3
2.3 Safety Precautions ����������������������������������������������� 3
2.4 Test symbols ������������������������������������������������������ 3
3. General ��������������������������������������������������������4
4. Troubleshooting ����������������������������������������������4
INSTALLATION
5. Mounting the appliance �������������������������������������5
5.1 Application �������������������������������������������������������� 5
5.2 Mounting ���������������������������������������������������������� 5
5.3 Water connections ����������������������������������������������� 6
6. Electrical connection ����������������������������������������� 6
6.1 DHC-E 8/10 - Appliance with output power options ������ 6
6.2 Temperature setting/anti-scalding protection ������������ 7
7. Commissioning �����������������������������������������������7
7.1 Appliance handover ��������������������������������������������� 7
8. Troubleshooting ����������������������������������������������7
8.1 Display options LED diagnostic „traffic lights“ ������������� 7
8.2 Fault table ��������������������������������������������������������� 7
9. Normal maintenance �����������������������������������������8
10. Technical Data ������������������������������������������������8
10.1 Dimensioned drawing ������������������������������������������ 8
10.2 Wiring diagram �������������������������������������������������� 8
10.3 Maximum temperature increase above ambient water
temperature ������������������������������������������������������ 9
10.4 Data table �������������������������������������������������������� 10
11. Spare parts ������������������������������������������������� 11
WARRANTY | ENVIRONMENT AND RECYCLING
OPERATION
1. General information
Note
Read these instructions carefully before using the ap-
pliance and familiarize yourself with its functions. Keep
these instructions safe. Pass on the instructions to a new
user if required.
1.1 Safety information
1.1.1 Structure of safety information
KEYWORD Type of risk
Here, possible consequences are listed that may re-
sult from not observing the safety information.
f Steps to prevent the risk are listed.
1.1.2 Symbols. type of risk
Symbol Type of risk
!
Injury
Electrocution
Burns or scalding
1.1.3 Keywords
KEYWORD Description
DANGER If this information is not observed, it will result in serious
injury or death.
WARNING If this information is not observed, it can result in serious
injury or death.
CAUTION If this information is not observed, it can lead to medium
or minor injury.