STIEBEL ELTRON DHE Connect 18 - Commissioning

ENGLISH
www.stiebel-eltron.com DHEConnect | DHETouch | 87
INSTALLATION
Commissioning
10.2 Installing the mini wireless remote control
You can attach the mini wireless remote control to the wall using
the wall mounting bracket.
 Secure the wall mounting bracket to the wall using the adhe-
sive pad provided or a suitable countersunk screw (∅3mm
or less).
11. Commissioning
11.1 Initial start-up
≥ 60 s
D0000053277
 Open and close all connected draw-off valves several times,
until all air has been purged from the pipework and the
appliance.
 Carry out a tightness check.
D0000053278
 Activate the safety switch by firmly pressing the reset button
(the appliance is delivered with the safety switch disabled).
In the DHEConnect18/21/24 and DHETouch18/21/24 appliances,
the medium connected load (21kW) is factory preset.
D0000053279
 Connect the programming unit connecting cable plug to the
PCB.
D0000053280
 Hook the appliance cover at the top rear into the back panel.
Pivot the appliance cover downwards. Check that the appli-
ance cover is securely fitted at both top and bottom.