STIEBEL ELTRON DHF 13 C-AU - 15.5 Data Table

www.stiebel-eltron.com DHF C-AU| 13
15.5 Data table
DHF 13 C-AU DHF 15 C-AU
222214 233985
Electrical data
Rated voltage 1 V 400 400
Rated output 400 V stage I max. kW 6.6 7.5
Rated output 400 V stage II min. kW 6.6 7.5
Rated output 400 V stage II max. kW 13.2 15
Rated current 1 A 19.5 21.7
MCB/fuse 1 A 20 25
Phases 3/PE 3/PE
Frequency Hz 50/60 50/60
Connections
Water connection G 1/2 A G 1/2 A
Total alkaline earths mol/m³ 2.5 2.5
Total hardness (H
2
O) Degree d 14 14
Hardness range 2 (medium
hardness)
2 (medium
hardness)
Application limits
Max. permissible pressure MPa 1 1
Values
Max. permissible inlet temperature °C 30 30
ON 1st Stage l/min >3.0 <3.0
ON 2nd Stage l/min >4.5 <4.5
Pressure drop at flow rate MPa 0.055 0.055
Flow rate for pressure drop l/min 4.5 4.5
DHW delivery l/min 6.7 7.3
Δϑ on delivery K 28 28
Hydraulic data
Nominal capacity l 0.6 0.6
Versions
Protection class 1 1
Pressure vessel material Copper Copper
Heating system heat generator Tubular heater Tubular heater
Cover and back panel Plastic Plastic
Colour White White
IP rating IP24 IP24
Dimensions
Height mm 370 370
Width mm 220 220
Depth mm 130 130
Weights
Weight kg 4.1 4.1
Note
The appliance conforms to IEC 61000-3-12.
Guarantee
The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not aect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment.
After use,
dispose of the various materials in accordance with national
regulations.
ENVIRONMENT AND RECYCLINGENVIRONMENT AND RECYCLING
INSTALLATION | ENVIRONMENT AND RECYCLING
Specication