STIEBEL ELTRON
15
Fault Cause Rectification
No hot water despite water
flow through the unit.
- The water flow volume
required for the unit
to turn it on has not
been reached.
- Increase flow volume
- The shower head is
blocked with dirt or
limescale.
- Clean shower head
or remove limescale.
- ELCB activated. - Push ELCB Reset
button.
3. Guarantee
For guarantees please refer to the
respective terms and conditions of
supply for your country.
The installation, electrical
connection and first operation
of this appliance should be carried
out by a qualified installer.
The company does not accept
liability for any failure caused
by improper installation and / or
unauthorized installers.
4. Fault elimination for the user
To Next Page
Loading...
