INSTALLATION
Preparation
14 | VRC-W 400 (E) www.stiebel-eltron.com
Minimum clearances
If you wish to install the silencer attachment, which is available
as an accessory, observe the minimum clearances it requires.
≥400
≥700
≥400
≥300
≥300
D0000040354
Installation drawing with silencer attachment
1486
1340
147
379
D0000085684
≥100
≥700
≥400
≥400
D0000085683
9.3 Transport
!
Material losses
If possible, transport the appliance to the installation lo-
cation in its original packaging.
If the appliance is transported without packaging and
without using a pallet, e.g. to carry it up or down stairs,
its outer casing may be damaged.
To transport the appliance without packaging, first re-
move the front panel of the appliance. See chapter "In-
stallation/ Removing the front panel".
!
Material losses
Never use the air connections as handles for carrying
the appliance.
344462-45598-9853_VRC-W_400_E_en_fr_it_nl.indb 14344462-45598-9853_VRC-W_400_E_en_fr_it_nl.indb 14 07.07.2023 17:00:0407.07.2023 17:00:04
To Next Page
Loading...
