STIEBEL ELTRON WPC 07 cool User Manual

www.stiebel-eltron.com WPC | WPC cool | 45
INSTALLATION
Troubleshooting
Fault display Cause Remedy
TO MFG Timeout MFG Check the communication cable terminal or replace the com-
munication cable.
ERR BH MFG The electric emergency/booster heater in the MFG is faulty. Check the communication cable terminal or replace the com-
munication cable.
ERR PU SOL MFG Error brine pump MFG. Check the communication cable terminal or replace the com-
munication cable.
ERR VALVE MFG Error 3-way diverter valve MFG. Check the communication cable terminal or replace the com-
munication cable.
ERR PU HC MFG Error heating circuit pump MFG. Check the communication cable terminal or replace the com-
munication cable.

STIEBEL ELTRON WPC 07 cool Specifications

General

Brand	STIEBEL ELTRON
Model	WPC 07 cool
Category	Heat Pump
Language	English