To Next Page

To Previous Page

WORKSHOP MANUAL







EDITION



PAGE

99 /

124



2. Keeping the nut (4) still, turn the screw (5) until

the desired gap is obtained under the slide (6)

measured with a feeler gauge.

3. Screw the internal valve (2) back into the valve

body (1) until the end.

When assembling, tighten the hydraulic fittings to the torque indicated in the “Hydraulic connec-

tions diagram” 



 





Stiga 2021 Edition PARK 320 PW User Manual

Questions and Answers: