WORKSHOP MANUAL
EDITION
PAGE
14 /
124
Position two wedges in front of the front wheels to prevent the move-
ment of the machine.
– Raise the machine using a jack that acts under
the rear transmission assembly.
– Stabilize the machine with two stands placed
in correspondence of load-bearing elements of
the rear part of the frame.
Use only original spare parts, the only ones with design, material and processing character-
istics optimized for the use on the machine for which they were intended; these characteristics are
not found in so-called “compatible” spare parts, and can compromise the safety of the machine
and the regularity of the operation.
Replacement of any machine component with anything other than a part authorised by the
Manufacturer can adversely affect performance, working life or safety of this machine and will void
the Warranty.
The manufacturer disclaims all liability for any claims or damages, albeit under warranty, property
damage, personal injury or death resulting from the use of unauthorised spare parts.