EN - 14
5 0.125
10 0.250
1.
2. Add all the oil.
3. Add the rest of the petrol.
4.
IMPORTANT The fuel mixture tends to age.
Do not prepare excessive amounts of the fuel
mixture to avoid the formation of deposits.
IMPORTANT Keep the petrol and
fuel mixture containers separate and
easily identiable to avoid the mistake
of using one in place of the other.
IMPORTANT Periodically clean the petrol and
fuel mixture containers to remove any deposits.
7.3 REFUELLING
Refuelling must take place when
the machine is switched o and
the spark plug cap removed.
Before refuelling:
1.
2.
NOTE The following symbol is found
near the fuel tank cap (Fig.32.A):
3.
4.
5.
NOTE When using the machine,
the fuel level can be checked through
the tank window (Fig. 32.B).
7.4 TOPPING UP THE CHAIN OIL TANK
NOTE The following symbol is found
near the chain oil tank cap (Fig. 32.C):
IMPORTANT Only use chainsaw
oil or adhesive oil for chainsaws. Do
not use oil containing impurities so as
not to block the oil lter and to prevent
irreparable damage to the oil pump.
guarantee good lubrication and reduces
is enough to guarantee that the fuel
7.5 CLEANING THE MACHINE
AND THE ENGINE
•
branches, leaves, or excessive grease;
• To avoid overheating and
•
7.6 CLEANING THE CHAIN
If there is excessive dirt or resin build-up,
To Next Page
Loading...
Need help?
General
