EN - 19
14. CHAIN MAINTENANCE TABLE
Chain pitch
Limiter tooth level (a) File diameter (d)
inches
inches inches
3/8 Mini
9.32
0.018 0.45 5/32 4.0
0.325
8.25
0.026 0.65 3/16 4.8
3/8
9.32
0.026 0.65 13/64 5.2
0.404
10.26
0.031 0.80 7/32 5.6
This table gives the sharpening data
for dierent types of chains, but this does
not mean you can use chains other than
those approved and listed in the "Correct
bar and chain combination table".
15. PROBLEM IDENTIFICATION
PROBLEM PROBABLE CAUSE REMEDY
1.
Incorrect starting procedure.
Anti-freeze device
Contact the Authorised
Service Centre or dealer..
2. The engine starts
Contact the Authorised
Service Sentre or dealer.
3. The engine runs
Contact the Authorised
Service Centre or dealer.
4.
Contact the Authorised
Service Centre or dealer.
5.
The starter grip has been
and
To Next Page
Loading...
