Stiga A 3000

47EN
4. INSTALLATION
4.7.27. OBSTACLE NOTIFICATION
The 'Obstacle Notication' function allows you to receive a push notication if the robot lawn mower
detects obstacles when mowing.
If the function is active and the robot lawn mower hits an obstacle a certain number of times, the position
of that obstacle is memorised. When the robot lawn mower returns to the charging base, it sends a push
notication to the user's mobile device containing all obstacles detected during the mowing session.
The user can:
• Ignore the presence of such obstacles and let the robot lawn mower bump into them.
• Physically remove obstacles from the work area.
• Automatically conne obstacles by means of a circular virtual no-cut zone. In this case, the user
selects the obstacles to be virtually conned from the list of detected obstacles, choosing the radius
of the no-cut zone circle to be created.
• Conning obstacles by means of a manually recorded virtual no-cut zone. This option is
recommended in the case of large or non-circular shaped obstacles.
Procedure:
1. Activate the function from the App's "settings" menu.
2. In case of obstacles, a push notication will be sent to the mobile device.
3. Open push notication and view obstacles found.
4. If you wish to conne these obstacles with a virtual no-cut zone, follow the App wizard.