To Next Page

To Previous Page

54 EN

5. OPERATION

NOTE: If after pressing the "CONFIRM" button (G), the " SELECT MODE" button (F) is pressed,

the icons for the selected functions will start ashing again, requesting conrmation of the newly

selected function. Press the “CONFIRM” button (G). The icons will once again light up with a

steady glow.

NOTE: if the cover (B) is opened, either during work or with the robot in the base, the icons

relating to the selected functions will ash,to indicate that it is necessary to conrm the operation

before closing the cover again. If the cover is closed without pressing the The "CONFIRM"

button (G), the robot will not perform any operation until a new command is given by the user.

Procedure:

1. Press the “STOP” button (A) to open the cover (B) and access the control console (C).

2. Press the “MODE SELECT” button (F) until the icons of the functions you wish to activate ash. The

icons relating to the selected functions ash.

3. Press the “CONFIRM” push button (G). The icons of the selected functions light up steadily to conrm

the action.

4. Close the cover (B).

5. The robot lawn mower will start working according to the set mode.

NOTE: If after pressing the “CONFIRM” button (G), the “SELECT MODE” button (F) is pressed,

the icons for the selected functions will start ashing again, requesting to conrm the newly

selected function. Press the “CONFIRM” button (G). The icons return to a steady light.

NOTE: If the cover (B) is opened, either during work or with the robot in the base, the icons

relating to the selected functions will ash,to indicate that it is necessary to conrm the operation

before closing the cover again. If the cover is closed without pressing the “CONFIRM” button

(G), the robot will not perform any task until a new command is given by the user.

NOTE: If the robot battery is low, the battery icon ashes red to indicate that the selected action

cannot be performed.

NOTE: NOTE: the robot lawn mower starts only after closing the cover (B).

NOTE: The robot lawn mower goes to the charging base with the cutting device switched o.

Stiga A 3000 User Manual

Questions and Answers: